产品详情
整体带芯输送带
结构特点及用途 Construction Features and
骨架受力体为整体带芯，芯体浸渍PVC 糊后，加覆PVC 或PVG 盖
胶形成。成品带具有优异的阻燃、导静电性能；带体轻、拉伸
强度高，整体性能好，带体不脱层、抗冲击、抗撕裂，适用于
煤矿井下易燃场合输送煤炭，亦可用于要求难燃、导静电的电
力、化工、冶金等行业。
产品种类细分：Product Classifications
根据盖胶的不同，整体带芯输送带分为：
According to cover grades,solid woven conveyor belts
o 普 通PVC输送带
上盖胶和下盖胶均为PVC盖胶，单面盖胶厚度不小于1.0mm,
未经过模压，使用环境不低于- 10℃。
o 模 压PVC输送带
上盖胶和下盖胶均为PVC盖 胶 ( 或 改 性PVC盖 胶 ) , 单 面 盖 胶
厚度可达4mm, 此种产品要经过模压，较比非模压的常规PVC带
来说，有耐砸穿、耐水浸、使用寿命长、机械接头效率高的优
点，使用环境不低于-10℃。
o PVG输 送 带
上盖胶和下盖胶均为丁腈胶，可用于煤矿井下倾角20°以下的
输送场合。此种产品为 范围内的优势产品，使用环境不低于-10℃。
o DYNA 输 送 带
上、下盖胶均为耐磨抗冲击型盖胶，可适于在地面上使用，工作环境温度不低于-15℃。
Applications
Belt load is carried by solid woven carcass,which is impregnated
with PVC paste then protected with PVC or PVG covers.Solid woven
belt has good fire resistance,anti-static properties It has lightweight,
high elongation at break,good adhesion,high impact resistance,and
high tear strength.It is suitable for underground coalmines as well as
environments where flame resistant properties is required.
can be classified as:
o Standard non-pressed PVC Conveyor Belt
Both top and bottom covers are PVC with gauge less than Q8mm.
not pressed.For use at environmental temperature above-10℃ .
o Pressed PVC Conveyor Belt
Both top and bottom covers are PVC (or special PVC compounds)
with gauge up to 4mm,pressed.It is superior to non-pressed PVC
belt in impact resistance,water soaking,service life,and splice
efficiency.For use at environmental temperature above 10℃ .
o PVG Conveyor Belt
Both top and bottom covers are nitrile rubber.Advantage of steep
gradient (<20°lft angle)conveying made this a niche product for
ContTech(Shandong)worldwide.For use at environmental
temperature above -10℃
DYNA Conveyor Belt
Both top and bottom covers are high abrasion resistant and high
impact resistant rubber.Suitable for aboveground application.For
use at environmental temperature above-15℃ .
产品规格表示 Belt Construction Nomenclature Example
PVC1400/1-1200-2+2
o PVC: 盖胶类型为PVC
○1400/1:表示骨架受力体为整体带芯，纵向拉伸强度1400N/mm
01200: 带体宽度1200mm
02+2:上盖胶和下盖胶厚度分别为2mm
注：
可按照MT914、SANS971、AS4606、BS3289、BC158等标准组织生产。
推荐使用模压PVC带代替普通PVC带，因其更长的使用寿命及更好的机械接
头强度。
|
技术参照表 Technical Parameters |
|
|||||||
|
强度规格 |
拉伸强度(最小值) |
带胚参考厚度 |
带胚参考重量 |
盖胶类型及推荐厚度(mm) |
参考带体宽度 |
|||
|
经向(N/mm) |
纬向(N/mm) |
(模压)PVC |
PVG |
|||||
|
680/1四级 |
680 |
265 |
65 |
8.5 |
1.5+1.5 |
15+1.5 |
500-2200 |
|
|
800/1五级 |
800 |
280 |
70 |
90 |
1.5+15 |
1.5+1.5 |
||
|
1000/六级 |
1000 |
300 |
80 |
105 |
1.5+1.5 |
1.5+1.5 |
||
|
1250/1七级 |
250 |
350 |
9.5 |
12.5 |
20+20 |
20+15 |
||
|
1400/1八级 |
1400 |
350 |
100 |
13.0 |
2.0+20 |
2.5+15 |
||
|
1600/1九级 |
1600 |
400 |
105 |
14.0 |
2.0+20 |
2.5+1.5 |
||
|
1800/1十级 |
1800 |
400 |
11.5 |
15.0 |
2.0+20 |
30+2.0 |
||
|
2000/1十一级 |
2000 |
400 |
12.5 |
16.5 |
20+20 |
3.0+2.0 |
||
|
2240/1十二级 |
2240 |
450 |
140 |
18.5 |
30+20 |
30+2.0 |
||
|
2500/1十三级 |
2500 |
450 |
15.0 |
20.0 |
3.0+20 |
30+30 |
||
|
28001十四级 |
2800 |
450 |
165 |
220 |
3.0+3.0 |
50+30 |
||
|
3100/1十五级 |
3100 |
450 |
18.0 |
24.0 |
根据具体输送环境定制 |
|||
