产品详情
Technical beters of pneumatic gas booster pump:
气动气体增压泵操作程序:
Pneumatic gas booster pump operation procedure:
1 操作规程
1 operation procedure
2.操作者必须熟悉设备的一般结构及性能,严禁超性能使用设备。
2 the operator must be familiar with the general structure and perbance of the device, and is strictly prohibited to use the equipment.
3.操作者必须掌握好使用设备的“三好”、“四会”和按设备维护保养“四项要求”使用和维护设备。
3. The operator must master the use of equipment, "Miyoshi", "four" and according to the equipment maintenance "four requirements in use and maintenance of equipment.
4.每天开机前应当清洁机器;
4 every day before starting the machine should be cleaned;
5.给空气滤水器放水,油杯里面要加足润滑油。
5 to the air filter water, to add the lubricating oil inside the oil cup.
6. 检查气管,接头,过滤器,是否漏气。
6 check the trachea, joints, filter, if the leak.
7.打开气阀,调整气压调节阀把输出气压调整到需用的数值。
7 to open the valve, adjust the pressure valve to adjust the output pressure to the required value.
8.观察增压泵是否能正常工作。
8 to observe whether the booster pump can work normally.
9.工作完毕后要关闭气阀,清洁机器。
9 to close the valve after work, clean the machine.
气体增压泵:www.sdjingtuo.com