产品详情
AV6471<\/span>光纤熔接机<\/b><\/span><\/span> <\/p> <\/a><\/span><\/a><\/span> <\/p> 产品综述：<\/span><\/b><\/span> <\/p> AV6471<\/span>光纤熔接机是一种全新设计的熔接设备。强大的功能和极低的损耗使其完全满足于干线和FTTx<\/span>环境的光纤熔接应用。轻盈的机身和精巧的设计使其在狭窄的工作环境也能应对自如；新光纤成像系统和纯数字化设计，图像显示更加细腻、清晰；采用实时嵌入式操作系统，提供友好的操作界面和更丰富的功能；内置超大容量高性能锂电池，为长时间野外工作提供了可靠保障；温湿度和气压实时补偿系统使熔接机随时适应外界变化，即使在恶劣的环境下也能获得光纤的低损耗接续。<\/span><\/span> <\/p> 主要特点<\/span><\/b> <\/span> <\/p> 全新设计，纯数字熔接机体积小、重量轻，含电池仅2.8kg<\/span>工作效率高，8<\/span>秒熔接，30<\/span>秒加热关闭加热盖自动加热，关闭防风罩自动熔接X<\/span>轴和Y<\/span>轴同时显示，光纤放大倍数304<\/span>倍实时放电校正系统，一般不需调整参数电极寿命长，可放电达4000<\/span>次提供USB<\/span>和VGA<\/span>端口5.7<\/span>英寸数字高清晰液晶屏提供**显示屏幕实时**显示电池剩余电量内置超大容量锂电池，可完成220<\/span>次接续及加热<\/span><\/span> <\/p> 工作原理：<\/span><\/b><\/span> <\/p> AV6471<\/span>光纤熔接机是结合了光学、电子技术和精密机械的高科技仪器设备。其原理是利用光学成像系统提取光纤图像在屏幕实时显示，并通过CPU<\/span>对光纤图像进行计算分析给出相关数据和提示信息，然后控制光纤对准系统将两段光纤三维对准，再通过放电电极激发出高温电弧熔融光纤以获得低损耗、低反射、高机械强度以及长期稳定可靠的光纤熔接接头**给出**损耗评估。<\/span><\/span> <\/p> 高清光学图像采集系统<\/span><\/span> <\/p> 高清双分离光纤对准仪高性能CMOS<\/span>传感器传感器像素640*480<\/span>高 <\/span><\/span> <\/p> 性能CMOS<\/span>传感器<\/span><\/span> <\/p> 透镜成像光纤对准系统<\/span><\/span> <\/p> 快速光纤端面评估**光纤对准**熔接损耗评估透镜成像**对准<\/span><\/span> <\/p> 实时放电校正系统<\/span><\/span> <\/p> 高性能放电电极交直流混合放电技术电流反馈及环境补偿 <\/span><\/span> <\/p> 电极的扫描电镜图 <\/span><\/span> <\/p> 典型应用：<\/span><\/b><\/span> <\/p> 作为国内**台光纤熔接机的设计单位，有着超过20<\/span>年的熔接机的研发、使用经验，我们深知高质量、高效率光纤接续的各种要求。AV6471<\/span>光纤熔接机是一款设计紧凑、操作简单、易于携带的光纤熔接设备。机身设计符合人体工程学的操作原理，即使在光纤很短的情况下也可以很轻松地进行熔接。<\/span><\/span> <\/p> AV6471<\/span>光纤熔接机可用于包括干线在内的所有光缆线路工程施工、线路维护、应急抢修、光纤器件的生产测试以及科研院所的研究教学中。<\/span><\/span> <\/p> AV6471<\/span>光纤熔接机典型应用<\/span><\/span> <\/p> 技术规范：<\/span><\/b><\/span> <\/p> 主 要 技 术 指 标<\/span><\/span> <\/p> <\/td> <\/tr> 适用光纤<\/span><\/span> <\/p> <\/td> SM(<\/span>单模)<\/span>，MM(<\/span>多模)<\/span>，DS(<\/span>色散位移)<\/span>，NZDS(<\/span>非零色散位移)<\/span><\/span> <\/p> <\/td> <\/tr> 接续损耗<\/span><\/span> <\/p> <\/td> 0.02dB(SM)<\/span>，0.01dB(MM)<\/span>，0.04dB(DS)<\/span>，0.04dB(NZDS)<\/span><\/span> <\/p> <\/td> <\/tr> 回波损耗<\/span><\/span> <\/p> <\/td> 优于60dB<\/span><\/span> <\/p> <\/td> <\/tr> 操作方式<\/span><\/span> <\/p> <\/td> 全自动、半自动、手动<\/span><\/span> <\/p> <\/td> <\/tr> 光纤对准<\/span><\/span> <\/p> <\/td> 先进的PAS<\/span>对准方式<\/span><\/span> <\/p> <\/td> <\/tr> 光纤直径<\/span><\/span> <\/p> <\/td> 包层直径80<\/span>～150μm<\/span>；涂覆直径100<\/span>～1000µm<\/span><\/span> <\/p> <\/td> <\/tr> 切割长度<\/span><\/span> <\/p> <\/td> 10<\/span>～16mm<\/span>（被覆光纤直径<250µm<\/span>）；16mm<\/span>（被覆光纤直径250<\/span>～1000µm<\/span>）<\/span><\/span> <\/p> <\/td> <\/tr> 放大倍数<\/span><\/span> <\/p> <\/td> 垂直双显，放大304<\/span>倍 ；水平双显，放大152<\/span>倍。水平单显304<\/span>倍。<\/span><\/span> <\/p> <\/td> <\/tr> 图像显示<\/span><\/span> <\/p> <\/td> 高性能5.7<\/span>英寸640*480<\/span>液晶屏，提供清晰、细腻的图像显示<\/span><\/span> <\/p> <\/td> <\/tr> 显示界面<\/span><\/span> <\/p> <\/td> 提供丰富的当前工作信息<\/span><\/span> <\/p> <\/td> <\/tr> 张力测试<\/span><\/span> <\/p> <\/td> 标准2N(<\/span>可选)<\/span><\/span> <\/p> <\/td> <\/tr> 热缩套管<\/span><\/span> <\/p> <\/td> 60mm<\/span>、40mm <\/span>和一系列热缩套管<\/span><\/span> <\/p> <\/td> <\/tr> 电池容量<\/span><\/span> <\/p> <\/td> 典型熔接220<\/span>次，充电时间约为3.5<\/span>小时(<\/span>可在充电时使用) <\/span><\/span> <\/p> <\/td> <\/tr> 电池寿命<\/span><\/span> <\/p> <\/td> 循环充电次数达300<\/span>～500 <\/span>次，客户自己可更换<\/span><\/span> <\/p> <\/td> <\/tr> 电量指示<\/span><\/span> <\/p> <\/td> 屏幕实时**显示剩余电量<\/span><\/span> <\/p> <\/td> <\/tr> 电极寿命<\/span><\/span> <\/p> <\/td> 典型值4000<\/span>次，客户自己可更换电极<\/span><\/span> <\/p> <\/td> <\/tr> 光纤夹具<\/span><\/span> <\/p> <\/td> 全新设计，使得光纤定位更**、方便<\/span><\/span> <\/p> <\/td> <\/tr> 施工照明<\/span><\/span> <\/p> <\/td> 内置高亮度、宽范围照明灯，极大方便夜间操作<\/span><\/span> <\/p> <\/td> <\/tr> 外部接口<\/span><\/span> <\/p> <\/td> 提供标准USB<\/span>接口及VGA<\/span>视频输出端口<\/span><\/span> <\/p> <\/td> <\/tr> 供电电源<\/span><\/span> <\/p> <\/td> 内置锂电池11.1V<\/span>；外接适配器，输入：AC100-240V<\/span>，输出：DC13.5V/4.5A<\/span><\/span> <\/p> <\/td> <\/tr> 工作环境<\/span><\/span> <\/p> <\/td> 温度：-10℃<\/span>～+50℃<\/span>；湿度：95%RH(40℃<\/span>，不结露)<\/span>；海拔高度：0<\/span>～5000m<\/span><\/span> <\/p> <\/td> <\/tr>