GF-WDZCEE23-125 DC 1.8KV光伏电缆

1. 标准Standard

本产品按德国标准2Pfg 1169/08.2007、CEEIA B218-2012和Q/321084KKQ13-2015等标准生产。

Thisproduct is produced according to the standard 1169/08.2007 2Pfg 、CEEIA B218-2012andQ/321084KKQ13-2015.

2. 用途Applications

适用于额定电压直流1.8kV直流组件与组件、组串之间、直流配电箱至逆变器之间的连接。电缆具有耐臭氧、耐酸碱、抗盐雾和耐环境气候等性能。The products are suitable for connection among components,among component assemblies and connection between power distribution box and inverterat rated voltage of DC 1.8 kV. The cable has resistance to ozone, acid andalkali resistance, salt fog resistance and adaptability to climate and otherproperties.

3. 型号、名称Type and Debion

型 号：GF-WDZCEE23-125

额定电压kV：DC：1.8 AC：0.6/1kv

名 称：光伏发电系统用交流(直流)传输电力电缆AC(DC) transmissionpower cable used for Photovoltaic power generation system

用途：本产品适用于交流额定电压0.6/1.0kV、直流1800V及以下逆变器至升压变压器、升压变压器至配电装置、配电装置至电网的安装连接。本产品有钢带、钢丝铠装、非磁性金属带、非磁性金属丝铠装等，具有抗侧压、抗拉伸、载流量大、耐臭氧、耐酸碱、抗盐雾和耐环境气候要求的特点。The product is suitable for installation connection between theinverter and step-up transber, between step-up transber and powerdistribution equipment, also between power distribution equipment and the gridat the AC rated voltage of 0.6/1.0kV , DC1800V or below. This product has thesteel belt, steel wire shield, nonmagnetic bl belt, nonmagnetic bl wireshield, etc., with features of lateral pressure resistance, tensile strength,large current-carrying capacity, ozone resistance, acid and alkali resistance,salt fog resistance and adaptability to environmental climate.

4．规格Specifications

导体截面(mm2)： 1.5 2.5 4 6 10 16 25 35

导 体 结 构： 30/0.25 49/0.25 56/0.30 84/0.30 84/0.4 128/0.4 196/0.4 276/0.4

导体 外径mm： 1.4 1.9 2.5 3.2 4.4 5.4 6.7 7.9

导体电阻Ω/km. 20℃：13.7 8.21 5.09 3.08 / / / /

耐压/15min： 3000 3000 3000 3000 3000 3000 3000 3000

电缆 外径mm： 4.6～5.2 5.0～5.6 5.8～6.5 6.8～7.5 8.0～8.6 9.6～10.3 10.6～11.8 11.9～13.0

参考载流量A： 20 28 40 32 / / / /

电缆重量Kg/1000m： 54 69 93 104 / / / /

5．性能 Perbance

1) 额定电压：直流1800V；交流0.6/1kV

Ratedvoltage: DC 1800V, AC 0.6/1kV

2) 适应的***低环境温度为-40℃、环境温度为125℃，在120℃的工作温度下可使用20年。

Minimum permissible ambient temperature of conductor is - 40℃ and maximum temperature is 125℃. It can be used for 20 years under the 120℃operating environment condition.

3) 电缆的弯曲性能优良，***小弯曲半径为电缆的6倍。

The cable enjoys excellent bending perbance and the min. bending radiusis 6 times of that of cable.

4) 电缆具有优异的耐酸、碱、油腐蚀能力，试验结果电缆仍能正常工作。

This cable has excellent resistance to acid, alkaline and oil corrosionand it can still remain normal working after the test.

5) 电缆可抵御恶劣环境和机械冲击，能耐受高温、紫外线、风雨、臭氧的侵蚀，其寿命是橡胶电缆的8倍，聚氯乙烯电缆的32倍。

This cable can stand against harsh environment and mechanical compactand has resistance to high temperature, ultraviolet ray, weather and ozone,whose life is 8 times longer than that of rubber cable and 32 times longer thanPVC cable.

6）卤素气体释放量试验：PH≥4.3,电导率≤10us/mm。

Halogen gas emission test:PH≥4.3, conductance≤10us/mm.

7）电缆燃烧无烟量试验：透光率≥60％。

Smokeless quantity test: light transmittance≥60%.

8）电缆阻燃试验达到德国标准2Pfg 1169/08.2007中的规定。

Cableflame-retardant test meet the requirements stipulated in 2Pfg 1169/08.2007

9）经特殊处理的电缆护套，有较高的机械强度，电缆可在屋顶结构的锐边上布线，且能承受一定的压力、弯折、张力、交叉拉伸载荷及强力冲击。

Cable sheath that has been provided with specialtreatment enjoys higher-level mechanical strength, which enables the cable tobe laid around the sharp edges of the roof structure and to bear a certainpressure, bending, tension, cross-tensile load and strong

GF系列电缆依据《光伏发电系统用电缆》的行业标准CEEIA B218-2012生产。

产品用途：光伏发电系统中控制回路信号及保护

导体材料：5类绞合镀锡铜丝（IEC 60228）

绝缘护套材料： 辐照交联低烟无卤阻燃聚烯烃

屏蔽铠装材料：镀锌铜带（厚度0.1㎜），

高工作温度：125℃

环境温度：-40℃~90℃

适用电压：450/750V

符合环保性能要求

铠装系列电缆具有良好的屏蔽特性，可有效隔离各种电磁干扰和雷电干扰

防雾、防潮

具有强抗紫外线和臭氧侵蚀性能

使用寿命：至少25年

标准控制电缆。型号规格

表1 电缆的型号

表2 电缆规格