产品详情
温州EP电解不锈钢管厂 EP不锈钢管 可来料加工
优质原材料管
Selected Raw Materials
316L SS 超洁净管，选用特殊的母管，通过控制低的硫含量来提高其焊接的可靠性和一致性。
316L SS UHP tubes&pipes are manufactued from a specially selected mother pipes, controlled lower content of sulfur levels to promote reliable,consistent welding.
2
材料和尺寸可定制
Various Material Type And Tube/Pipe Type
本公司有无缝、半无缝以及焊接类型，选择众多满足顾客不同的要求，节约成本。
Seamless,Semi-Seamless and Welded types are available for wide selection and cost saving options
3
化学清洗及超洁净清洗
Chemically And Ultra High Purity/UHP Cleaned
BA&EP管通过化学清洗以及酸洗处理来控制非挥发性残留，以此来满足ASTM G93或者SEMI E49.6要求。 超洁净管通过高精度清洗（18MΩ 的超纯水）后以高纯度氮气（99.9995%浓度）冲吹净化管道，并在管内充填，最后在10级无尘室包装。
BA&EP grade tubes&pipes are chemically cleaned and passivated to keep nonvolatile residue levels to comply with ASTM G93 or SEMI E 49.6. UHP tubes &pipes are rinsed with 18MΩ di water and purged with 99.9995% filtered nitrogen and are packed in an class 10 cleanroom.
4
可追溯性及洁净包装
Traceability And Clean Packaging
每一根管子都进行喷码，包括制造商、材料类型以及加热编码等信息。 BA&EP管通过如下方式包装：末端和首端裹上PA薄膜，橡胶保护帽封口后，BA管用单层防静电袋包装，EP管用双层防静电袋包装。
Each tube&pipes is marked to identify manufacturer,material type and heat code. BA&EP grade tubes&pipes are packed as following manner:eds are faced and protected with polyamide nylon film and polyethylene caps, packed in single(BA grade) or double(EP grade) polyethylene bags.
5
多种专业检验设备
Professional Inspection Equipment
我们有多种专业的检验设备：扫描电子显微镜、能谱仪、粗糙度仪、粒子计数器、硬度计、露点仪、金相显微镜、拉力试验机等。
We have a variety of professional inspection equipment:Scanning Electron Microscope（SEM）,Energy Dispersive Spectroscopy（EDS）, Surface Roughness Gauge,Particle Counter,Micro Vickers,Moisture Analyzer,Metallography Microscope,Tensile Testing Machined etc.
