产品详情
石油、钢铁、航天、航空荧光磁粉探伤设备，大型在线检测磁粉检测仪
石油、钢铁行业荧光磁粉探伤设备
设备用途：主要用于检测石油钻杆、管接箍、管端、连轧、连锻方形、矩形、圆形坯料等并退磁。
The equipment is used for detecting oil drill pipe,pipe couping,pipe end,rolling forging square rectangular and round billet,etc. and demagnetization.
设备特点：在线非接触式磁粉探伤、探伤效率高、彻底避免打火、快速退磁。
Non-contact magnetization on line,high efficiency detection speed,avoid sparking compleby,demagnetization fast.
执行标准：
中华人共和国磁粉探伤机GB3721-2005标准和机械工业部行业磁粉探伤机JB/8290-2005标准；美国ASTM标准，或国内JB4730的标准；美国《MIL－6867C》标准；
航空航天荧光磁粉探伤设备
The MT equipment for aerospace,military and nub power industry
设备用途：
该系列设备主要用来对航空航天、军工、核电等对探伤深度要求较高的部件探伤。
This series equipment is used in aerospace,military and nub power industry,which
has higher detection depth requirements.
设备特点：
Ø 三相全波直流输出，探伤深度可达5-8mm
The three-phase full-wave DC output is adopted, the detection thickness reaches 5 to 8mm.
Ø 超低频直流反向衰减退磁达到美国军标，可以将由于直流磁化产生的强磁场有效退去。
The ultra-low frequency DC inverse attenuating demagnetization reaches the USA military standard, and the strong magnetic fields generated by DC magnetization can be effectively removed;
Ø 可以采用线圈缠绕感应法、直接通电法、线圈感应法等多种磁化磁化方法。
The equipment can adopt various magnetizing bs such as a coil winding induction b and a direct electrifying b
Ø 智能控制：设备采用PLC和触摸屏控制，操作简单。
Inbligent control: The equipment adopts PLC and touch screen control and is easy to operate.
Ø 采用LED冷光源荧光灯
UV-LED black light lamp is used in this equipment.
执行标准：
中华人共和国磁粉探伤机GB3721-2005标准和机械工业部行业磁粉探伤机JB/8290-2005标准；美国ASTM标准，或国内JB4730的标准；美国《MIL－6867C》标准；
