产品详情
The Guardian line safety rope pull switches and grab wire pull cords are designed to be mounted on machines and sections of conveyors which cannot be protected by guards.
In contrast to traditional mushroom head type emergency stop buttons, Grab Wire Safety Rope Switches can initiate the emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
In combination with a dual channel safety monitoring relay, IDEM’s range of safety rope pull switches and grab wire pull cords can be used as emergency stop devices, monitored for up to PLe in acc. with ISO13849-1.
All IDEM safety rope pull switches conb to ISO 13850 and IEC 60947-5-5 and have a positive mechanical bage between the switch contacts and the wire rope. The rope pull switches have wire breakage monitoring.
On pulling the rope, the safety contacts are positively opened and the auxiliary contacts are closed. The safety rope switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button as required by ISO 13850.
An optional 2 colour LED indicator is available to enable switch status to be viewed from a distance.
ATEX Rope Switch – EN618 – EN619 – IEC 60947-5-3
保护线安全拉绳开关和抓斗线拉绳被设计安装在不能被保护的机器和传送带部分。
与传统的蘑菇头型紧急停止按钮相比，抓斗钢丝绳安全绳开关可以启动紧急命令沿着安装的绳子长度的任何点，并为暴露的输送机或机器提供强大的紧急停止绳拉保护。
与双通道安全监控继电器相结合，IDEM的安全拉绳开关和抓斗电线拉绳可作为紧急停止装置，监控可达PLe。
ISO13849-1。
所有IDEM安全拉绳开关符合ISO 13850和IEC 60947-5-5，并在开关触点和钢丝绳之间有积极的机械连接。
拉绳开关有断线监控。
拉绳时，安全接点积极打开，辅助接点闭合。
安全绳开关是机械锁存的，只有按下ISO 13850要求的蓝色复位按钮才能恢复到操作状态。
一个可选的2色LED指示灯，使开关状态可以从远处查看。
ATEX绳索开关- EN618 - EN619 - IEC 60947-5-3
联系人：侯经理 电话：13661967205 QQ:544465112
