产品详情
1、首先打开门窗设备的电源开关，电源指示灯亮之后可以根据型材的需要锯切的角度，松开设备的锁紧手柄，根据旋转的角度选择合适的按钮。
1, first open the door and b equipment power switch, after the power indicator light, according to the needs of the cutting saw angle, loosen the locking handle of the equipment, according to the angle of rotation select the right button.
2、根据型材的锯切长度要适当的调整活动机头的位置，并按下设备的锁紧按钮以便将活动机头锁紧。
2. According to the sawing length of the profile, adjust the b of the movable head properly, and press the locking button of the equipment so as to lock the movable head.
3、根据型材的高度和宽度将型材放置于工作台面上时，要注意放平，再进行加工。
3, according to the height and b of profiles, placed on the work table, should pay attention to flat, and then processing.
4、开启门窗设备的电机按钮，按下压紧按钮，要检查型材是否已经压紧，然后要同时按下工进和压紧按钮，机头上的锯片会匀速的切割型材。松开按钮锯片就会退回。
4, open the door and b equipment of the motor button, press the press button, to check whether the profile has been pressed, and then press the work in and pressing button, the head of the saw blade will be unib cutting profiles. Release the button and the saw will return.
5、加工完毕之后按下电机停止按钮，就可停止机器的运作，如果遇到特殊情的况，可以按下紧急停止按钮，电源即会断路。
1, first open the door and b equipment power switch, after the power indicator light, according to the needs of the cutting saw angle, loosen the locking handle of the equipment, according to the angle of rotation select the right button.
2、根据型材的锯切长度要适当的调整活动机头的位置，并按下设备的锁紧按钮以便将活动机头锁紧。
2. According to the sawing length of the profile, adjust the b of the movable head properly, and press the locking button of the equipment so as to lock the movable head.
3、根据型材的高度和宽度将型材放置于工作台面上时，要注意放平，再进行加工。
3, according to the height and b of profiles, placed on the work table, should pay attention to flat, and then processing.
4、开启门窗设备的电机按钮，按下压紧按钮，要检查型材是否已经压紧，然后要同时按下工进和压紧按钮，机头上的锯片会匀速的切割型材。松开按钮锯片就会退回。
4, open the door and b equipment of the motor button, press the press button, to check whether the profile has been pressed, and then press the work in and pressing button, the head of the saw blade will be unib cutting profiles. Release the button and the saw will return.
5、加工完毕之后按下电机停止按钮，就可停止机器的运作，如果遇到特殊情的况，可以按下紧急停止按钮，电源即会断路。
5, after processing, press the motor stop button, you can stop the operation of the machine, if you encounter special circumstances, you can press the emergency stop button, the power supply will open the circuit.
济南天鑫数控设备有限公司
济南天鑫数控设备有限公司(
15964542270)是一家专门从事铝塑门窗设备,断桥铝门窗设备，塑钢门窗设备，铝幕墙设备，中空玻璃设备的研发，生产，销售和技术服务的现代化高新技术企业。
公司铝门窗加工机器可完成铝型材的切割，组角，钻孔，冲孔，弯圆等工序，塑钢门窗设备可
完成型材切割，焊接，铣削，清理等工序。十大系列，四十余个品种设备，均得到了广大新老客户的一致好评。
济南天鑫数控设备有限公司
联系人：朱经理
电话：0531-85977876
传真：0531-85977876
手机：15964542270
网址：http://www.tianxincnc.com/
地址：济南市槐荫区工业园5-26-1号
中国鲁商云网：http://www.lushangyun.com/
济南微信营销，济南微营销，济南微信推广www.weidaoshang.com
诺商商道系统，-专业互联网应用服务提供商：www.chinanovo.net
诺商商道系统，-专业互联网应用服务提供商：www.cn-un.net
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！
